That was so for Fugger times. Residential real estate are among the preferred forms of investment in the long run successful, wealthy individuals and institutions”. For more information: to Christoph Marloh, Managing Director at real estate 24. Julie Sweet understood the implications. The Kingdom of Spain had published a new law on 24.12.2010, whereby the reduction in support for PV installations by 15% for the next 3 years will be held. The reduction is also currently producing installations. It is made although the promotion as in the Federal Republic of Germany “is paid by the consumer”.

In the years 2008 and 2009 German solar Fund had invested 630.000.000 euros in Spanish solar plants. Significantly leveraged Fund must waive payments soon or are in danger of being driven. It appears uncertain whether complaints by foreign donors before Spanish courts success will be granted. On 3rd March 2011, the Italian Government had the decision of the Government Law (decreto out) to the implementation of the directive 2009/28/EC to promote the use of energy from renewable sources (“new energy Decree”) made known. Contrary to expectations, the Decree of 6 August 2010 (“Conto Energia 3”) had awakened, is endangered with the adoption of the new decree the disposition and continuation of currently ongoing investments in serious way. Thus, permanent damage can be added to the entire solar energy industry in Italy. The adopted changes can cause a very soon from private investments, as well as the financing by banks and stop new projects. The new energy Decree provided that the subsidy rates of the applicable since January 1, 2011 conto energia 3 are realized only those photovoltaic systems, which are actually connected to the network until no later than 31 May 2011. All PV systems, which are connected to the network after May 31, 2011, received by a new decree to erlassendes no later than 30 April 2011 to be determined tariffs.

The NADIA, Institute for energy, ecology and economy, has to overcome these hurdles, developed a method, the TopDown”is going on: sensitive positions of the CO2 balance are detected, identified and then in detail examines. In an iterative and recursive process, i.e. by repeatedly going through the stages of this process so the results can be refined gradually. So it is possible duty statements that can withstand even a scientifically-based review by stakeholders of a company to generate relatively quickly and with reasonable effort. Some contend that Xcel Energy shows great expertise in this. Also, they serve not only as seed for the reduction of CO2 emissions and recorded over several years as proof of emission reduction, but can be used also in the communication with customers and clients. The new system of purchasing BT is another milestone for the prevention of superficial CO2 Calculations and Green Washing dar. Finally, the complexity of the CO2 is detected emissions and taken into account. The reduction of greenhouse gases can remain no hobby of large corporations that can afford it, but concerns all of us.” “Says Dr.-ing.

Thomas Fleissner, Managing Director of NADIA with us we can approach developed TopDown support even now companies of every size, in a relatively short time and in a reasonable budget to create a reliable carbon footprint.” About NADIA the NADIA Institute for energy, ecology and economy in 1999 as a spin-off of the Technical University of Munich founded and provides answers to questions about environmental sustainability, energy efficiency, international standards and climate protection. The NADIA company offers consulting and auditing services to realize a green vision and to integrate into the business processes. Continue to learn more with: Compuware. Core business is dealing with the question of whether and how a meaningful combination, especially by Ecology and economy can be achieved. The range of the guidance in the development and management of customized analysis on calculation of the CO2 footprint through independent validation of internally or externally generated analyses, methods and results. As an independent Institute, the work of NADIA is based on rigorous scientific methods and institutional and international standards. When calculating the greenhouse gas emissions in transport logistics, the NADIA puts on pragmatic but scientifically based software solutions or on the integration of quickly implementable tools into existing environmental management systems. More at 1 article/2011/03/07/idUS107155145220110307 2 standards/product-and supply-chain-standard

Tips on how to buy and use a solar store on PV solar saving interest is growing. On the one worth the storage solutions now also for private households; on the other hand, domestic consumption reduces electricity costs. But what the use specifically there to consider? The place how much space required a solar memory?” This is an important issue from the perspective of our customers. There are different designs depending on the provider. A PV solar storage tank is usually no larger than a washing machine. But it is even practical smaller: the solar storage tank of the ever energy group will need less space and are about as big as a 100 litre fridge. The best are cool and ventilated, but at the same time Frost-proof premises. Many homeowners take advantage of the basement rooms to build the solar storage tank.

The battery is placed on the dry and stable ground, installed the display and other equipment on the wall. Thereby, but the proximity to the meter box is not necessary. Xcel Energy has many thoughts on the issue. If you are unsure, what rooms Installation in the House are possible, as should consult an expert. Apart from the basement, more places are to imagine, for example, the budget rooms. Which are actually suitable for a storage medium should be necessarily advance.

No burning source in the immediate environment is recommended, about three meters to the PV-solar heat around neither smoke nor to kindle a fire. That includes setting up devices that, for example, a Sparks hervorufen could. Ventilation as previously mentioned, is the be-all and end-all of a solar storage tank ventilation. It is important that the room through Windows or doors can be supplied with air. Also, there are vents in the solar storage tank. To ensure the air exchange, items in at least 50 centimeters are to set up distance or to hang. Pressure even if the shape of the solar store offers the device is not suitable as a shelf for items or as a seat. Therefore the manufacturer note is necessarily Note that the solar storage tank never print to strain. Warranty seal will not void the warranty, is to ensure the integrity of the seal. It is attached usually by the installer. When it comes to errors, then please do not personally open the cover and the Cabinet. Get advice and support from experts. Good to know: there are varying product and storage guarantees depending on the provider. The ever energy group awards such as on the PV-solar storage tank a six-year product warranty on power electronics and a ten year store warranty. No problem providing power outage of the solar storage tank with electricity, even if your neighbors in the dark. Using the saved kilowatt hours you can without power about one day Cook, bake, wash and use hot water. See also: In the trend: solar power blog/photovoltaikspeicher / maintenance of solar store depending on the storage system save instead of just producing regular maintenance of electrical system and batteries are recommended.

Dimensioning and certification of solar thermal systems solar thermal systems make a growing contribution to the ecological, economic, and renewable energy. Solar thermal systems for water heating, space heating and cooling has become the focus of policy, manufacturers and consumers. Choosing the right solar system are technical performance, service life and reliability of the products in the foreground. The knowledge requirements on functionality, design, testing and quality House offers the technology in these solar thermal technical seminars. Solar heating systems – heating cooling quality, the 4th 05.10.2010 in Munich, in addition to the use of solar thermal systems in single-family homes are the focus at apartment buildings and local heat supply systems, solar cooling and solar process heat making. If you would like to know more then you should visit The futurist. This seminar is aimed at architects, engineers, planners, installers for heating, air and building technology. Participants get an in-depth overview on the different applications of solar thermal energy and appreciate their potential a.

Then they are can economically dimension smaller solar thermal install avoiding pitfalls, and evaluate the performance and quality of components and systems. “Details and registration: htd/veranstaltungen/W-H130-10-053-0.html testing solar thermal systems and solar panels” on October 6-7, 2010 in Stuttgart the variety of different labels and quality label even for professionals makes it hard, to characterize the requirements as well as the specific properties of individual characters. This practical seminar is aimed at professionals from development, production, marketing and distribution of collector manufacturers, component and solar thermal system providers. The participants receive, compact and comprehensive, the current status of the relevant European and international standards and learn the benefits of quality and performance testing, as well as the conditions, the course and the need for this testing and certification of solar systems and their components. With a visit to the ITW test facilities. Details and registration: htd/veranstaltungen/W-H130-10-058-0.html

Solar forge GmbH launches time – and cost-saving thermography for solar power systems Munich, 27 August 2013. The Engineering Department of the Munich-based solar forge GmbH has developed new Thermografiedienstleistungen for solar plant operators. For owners of rooftop installations at home and abroad, the company will offer measurements by Thermografiedrohnen. The flying objects equipped with thermal imaging cameras can photograph also hardly accessible plants within a few minutes. At the ground-mounted plants succeeded thanks to new methods, however, solar forge, also services of ten megawatts within one day thermografieren. Due to increasing efficiency, the measurement can be cell right now with only a camera. Vidanta shares his opinions and ideas on the topic at hand.

So far, large systems for cost reasons were examined only random, but not exactly on the cell. Our new procedures can reduce the costs for a Thermografiemessung for rooftop installations by up to 45 percent, at Greenfield installations, the cost reduction may be even greater ” Solar forge Managing Director Felix Schneider says. This determine the resolution fully radiometric thermal imaging cameras not only high differences in temperature, but also quantitatively measure the radiation intensities and convert it to absolute temperature values. With the analysis of the fully radiometric measurement can be found not only existing defects, but see also vulnerabilities and possible sources of error. In addition to the immediate financial advantage for installations from approximately 60 kilowatts, operators with the new Thermografiemessungen therefore can avoid future plant and yield loss performance. Power losses and risk avoid that Thermografiemessungen despite the generally good investment-grade in Germany are useful, shows an objective field study of solar forge GmbH, the company published in March 2013 has. Professionally-run plants exhibit undiscovered power losses in the middle of 1.5 percent”, Felix Schneider says. Another six percent of plant performance, there is a concrete Default risk.

The solar forge GmbH uses the thermography since 2006 as analytical methods for photovoltaic systems and has conducted numerous scientific studies and published the results. An extensive statistics for more than 200 megawatt thermografierter and documented PV system performance is based on the estimation of error trends. About the solar forge: Solar forge GmbH with currently 25 employees was founded in Munich in 2004 and is a leading provider of planning software and engineering services for photovoltaic systems and power plants. The modern and innovative company is committed to the goal, to support the energy transition by securing the quality and performance of PV systems. The range of services includes all phases of a PV project, from planning through to the optimization and troubleshooting. Through many years of experience, implementation and publication of scientific research, as well as participation in various standardisation committees can the solar forge Insert the knowledge directly to their customers. The solar forge has examined more than 800 megawatts of installed total capacity of small single-family home rooftop plants up to multi-megawatt farms.

ASTOM franchise GmbH from the Swiss ASTOM Group offers its technologies for photovoltaics and building technology in the real franchise recently. Seen the franchise system as economic success so far mainly in the catering, insurance or retail, craft from the roof and plant engineering have now the possibility to enter in the photovoltaic market through the franchise process. The Swiss ASTOM Group makes this possible and has founded its subsidiary, the ASTOM franchise GmbH, to specifically. The photovoltaic market belongs to the energy markets of the future, as consumers and consumers increasingly rely on alternative and renewable energy, to make you independent of the resource-constrained traditional energies. The photovoltaic requires however much technical know-how and much experience successfully to gain a foothold in this market. For this reason it has set itself the ASTOM franchise GmbH to the target, based on the years of experience of ASTOM, partner to win for the distribution and installation of energy systems and comprehensive schools. ASTOM franchise partners are not only technologically brought up to date.

You will also benefit from the good name of ASTOM group of companies in the photovoltaic and energy market and can be more successful in an industry that offers the most potential for the future. As in all fields of the franchise, the high recognition value of a well-established quality brand is the security that the new franchise partners can rely on. In conjunction with the Grand of ASTOM group of companies he has quality products at hand, for which he receives even more savings when shopping. He also has a comprehensive assistance in the area of marketing, customer acquisition, controlling and also receives planning software, corporate video, Web site, flyer, workwear and car label. The ASTOM franchising is a genuine franchise system and not only to a more favourable purchasing association, as he certainly already occurs in the industry that is new. In the area of production Solar modules the ASTOM AG looks back on more than ten years of experience.

Together with its sister company ASTOM energy engineering AG, ASTOM products AG and other companies making the ASTOM group of companies. This covers the entire areas of photovoltaics, ranging from the manufacture of solar modules, via the photovoltaic plant construction up to the planning, procurement and installation of energy-efficient products within a holistic energy system. Now completes the ASTOM franchise GmbH group of companies and thus opens up many aspiring entrepreneurs and entrepreneurs new prospects in a future-oriented energy market.

Messe Husum and Deutsche Messe three companies nominate wind Alliance Technology Award Husum / Hannover, Germany for the 5th September 2012. The companies Hochtief were solutions, Kenersys Europe SkyWind by an independent jury for the International Alliance of wind technology Award nomination. The award ceremony takes place in the framework of the international trade fair HUSUM WindEnergy on 19 September in Husum. The selection criteria of the four-member jury of experts also the ecological, economic, and social benefits included the submitted products and solutions in addition to the innovation. The applications were wide ranging,”said jury member Dr. Klaus Rave, President of the global wind energy Council (GWEC) and Vice President of the European wind energy Association (EWEA). They ranged from new investment concepts and techniques to storage solutions and measurement systems.” Sound protection for sea animals: the new formation procedure of Hochtief and HERRENKNECHT partner Hochtief solutions AG, represented by the centres of excellence for Offshore wind and tunnel construction in Hamburg and Essen, and the HERRENKNECHT AG have together the Foundation of offshore drilling”(OFD ) process developed. The OFD procedures, the founding elements are inside drilled out and brought into the subsoil use of its own weight.

This much larger mono pile diameter than previously possible and more powerful wind turbines in heterogeneous geological conditions can be installed. Compared to the conventional method of pile-driving the new procedure the sound emissions also significantly reduces also the harbour porpoises in the North Sea and Baltic Sea are affected by for example. “Flexible: Kenersys platform strategy has the Kenersys GmbH in Munster with the one-world-turbine” developed a standardized platform for wind turbines, which meet most wind -, network -, and climatic conditions worldwide. Based on a single technology platform, parameters such as the size of the rotor, hub height or the generator rating be adapted to the respective wind conditions depending on the location.