Learn what steps a professional masonry drying run off before should start the masonry restoration is traditionally a sample of the affected wall to control the salinity. Then, the mortar to use is set to ideally reconstruct the masonry. For the closure of the columns in the wall, sand as construction mixture is added in a masonry restoration. As a result, the masonry Gets a mature and resilient construction. Next, loose-fitting edges of plaster on the walls are isolated, cracks are cleaned of dust and mortar remains and sealed with mortar emaciated with sand on the surface. This plastic is used.

This is a filling of cracks from bottom to top with the selected injection mortar. Following is the masonry restoration cut off the tube, summarized the holes and adapted to the surface. On the south wall, a masonry restoration of cracks is continuing. Along the cracks in the vaults and on the bridges between wall and Vault as well on the vault ribs taken narrow strips of plaster in the masonry restoration. The cracks and joints were from gemoertelt and plastered. Especially fine cracks were via schlaemmt. The measurement points to crack monitoring are included in the mechanical handling of the cracks. One drawback of the brackets should be bypassed what also succeeds in most cases.

Insert the mortar in the walls is done above the window, making there present cracks can be picked up. A present in the roof space above the arch window niche, which the wall is weakened, is walled off. The below that the cracks in the wall area be needled usually at an ordinary masonry restoration. By mounting a boards pavement as static effective ceiling washer level the beams in the attic, the building is stabilized and acts as an abutment for the wall of the entire structure. The floor boards from coniferous are incorporated into three layers, boarded up and in the area of the outer wall with hardwood lined so that a safe, solid and professional masonry restoration can be performed.