A cooling system with numerous streams directed to different sides, provides fast and uniform cooling products. Electronics and Automatics their way into refrigerators. There is models of refrigerators in which the temperature sensors determine the still warm 'newbie' who is in the camera, and send it to a strong flow of cold air. Widely used automatic defrost refrigerator camera. In refrigerators with no forced air circulation – this is 'crying wall'. In refrigerators with automatic defrost system, so the moisture from the air condenses on the back of the camera and turns it into frosting.

Periodically, when the compressor is not working, frost is melting and dripping on the outside of the channel capacity of the unit, where the moisture evaporates. Naturally, automatic defrosting eliminates the need to periodically defrost fridge to wash it. In the cold room to store products that do not require a deep freeze. It should not be packed to capacity – it is necessary that air can circulate freely between the products, then products much longer will delight you with freshness. Learn more at this site: Lewis F. Powell Jr.. Freezer in the fridge freezers achieved sufficiently low temperature, and it is very important that the energy of the fridge went not to the formation of coat of frost and to maintain the desired temperature of chilled foods. If the refrigerator is used Eastholme cooling No-frost, then in the chamber forced circulation of cold air so that it does not frost is formed. Moisture from the air turns into frost outside the freezer, the same frost periodically melted and vaporized.

The coating thickness can be increased up to 100 microns – and then the pile will last the life of not less than 100 years. The protective coating is performed after making the entire pile – so it evenly covers the entire outer and, importantly, the inner surface of svai.Raschet the required number of screw piles for the foundation for the preliminary calculation of the required number of screw piles for the foundation of the screw device of your home (buildings) should be sent by e-mail or by fax to the design of your house (building) of which must be seen: Floors; plan 1st floor, window and door openings; circuit structural base of the 1st floor, the presence of stairs, furnace or fireplace; In addition, there will be more than learn geodesy (geology) the construction site. Without hesitation Salman Behbehani explained all about the problem. A preliminary calculation is usually ready within 1 working day. After approval of the preliminary calculation of the customer and pay for – an order for the foundation checked by designers (usually adjusted to + / – 1 pile) and goes to work. Telephone Communication (812) 932-34-25Sravnenie process unit concrete strip foundation and the foundation of the process device on screw piles Select the type of foundation depends on the type of home. The material for the foundation, usually a reinforced concrete. That's a standard set of types of foundations for the houses: melkozaglublenny ribbon of reinforced concrete, with a columnar grillage; band of small-sized melkozaglublenny elements, columnar, tape melkozaglublenny of small-sized elements on the concrete pad.